I will be active as Rover in the 2022 ARRL SEP VHF Contest -- basically solo grid circling around 38 N and 104 W all weekend. It's not my favorite VHF contest -- last time was during the worst of

Here's my plan: Saturday 1800-2000 Z: DM54xa 2030-0200Z or so: DM53ww Sunday: Probably get a late start, at best, and try to pick up a few either from DM65 or DM74. I'll have 6 (100 W), 2 (100 W),

Thanks John. Yes, he's looking for fixed values mounted on and/or part of a PCB for this application. I'll pass your suggestion on to him. 73, Bill Mader, K8TE ARRL New Mexico Section Manager ARRL -

Bill - I'm not sure I understand what your friend needs, but if he's just trying to design a lumped-element pi network he could try "PI-EL." As the name implies, it's a program for designing pi and

A friend is working on a 450 MHz colinear antenna for which he was to design a PCB that will match about 250 Ohms. I don't recall the reactance., if any. He has (nearly) unlimited test gear at ASU

Looking to set up a sked to debug a new 220 FM-only setup in the ABQ area or East Mountains, hopefully before the Sept. VHF+ contest weekend. Maybe start out on a repeater and then move to 223.50

Probably single-op FM only (SOFM) and/or Limited Rover (RL). 73 de K6EEN Cedar Crest

Sorry to hear you're still clearing things up in South Dakota. Hope you are able to be back in the area soon. I'll listen for folks next weekend, and see how we do. Kyle KC0LFQ

Kyle, I plan to be on 3 bands; 50, 144 and 432. I hope to have digi running on 144 and 432 by then as well as 50MHz. Can run SSB or CW in any event. Jim KC7QY Socorro, DM64nb

Kyle and John- I will not be out for the contestants I amnstill in South Dakota cleaning out my dad’s house. You might have better luck from Magdelena Ridge working the guys in Az. Post your plans

I'm planning to go out for Sept. VHF - maybe just heading down to DM53/DM54 on Saturday and operating closer to/at home Sunday. John, AA5PR/R

Looks like the Sept VHF Contest is next weekend. Is anyone planning to be on the air? I am considering a trip down to DM63 (Magdelena Ridge) or DM74 (Gallinas Peak) to operate remote for a few hours

Greetings — The New Mexico QSO Party is happy to announce a newly released feature: Downloadable and printable certificates for all participants who submitted their online or paper log!

Greetings — The 2022 New Mexico QSO Party, which took place last April, was another great success and results have been posted! Hams from all over New Mexico, the United States, and the world took

John, ping me on Slack VHF-CHAT if you have Internet access and I'll work you on 2M. My 6M activity will probably be limited to looking for new grids or running guys on SSB if the band opens. Good

I'm planning on operating from DM86, DM76, and DM85 on Saturday. DM74 and DM75 on Sunday. I haven't been very good about sticking to a schedule in the past, so I'm not even going to publish one now,

I'll be out there for the CW WW VHF contest this weekend. ( See https://www.cqww-vhf.com/ ) It's my usual grid circling around the 38°N, 104°W brass cap. Saturday DM88bb: 1800z~2000z DM87bw:

Thanks! I just did a lat/lon to lat/lon distance check using an online web page. 35.0844° N, 106.6504° W (ABQ airport) -to - 38.0000° N, 104.0000° W (corner DM77,78,87,88) is 249 statute

Keith - Yes, that is true, I got confused with the ARRL 222 and up contest, for which one must define a circle. Sorry. The one I did for that was a real chore to get everyone in the circle, but it

If I recall correctly, there is no circle for ARRL contests. The club is set up as a regional entity, encompassing only the state of NM. I still send in logs crediting NMVHFS though :) -W9RM Keith