Bob, Hi, Paul Probert here. I've been looking for a 10 GHz beacon to help with lining up and testing a 10 GHz station I'm putting together here in ABQ. So I'm glad to hear you are working on one up

No location, we're just spitballing at this point, but it's real enough that I thought it worth mentioning here on the list. My roof (or just above up on the tower) is in the shadow of Pajarito, so

Hello all Very interested in the progress of the 10ghz beacon Do you have a location where you are going to put it? I am in the progress of getting my 4ft dish up and 30 watts at the antenna

A good rule of thumb when deciding tolerances of all kinds involving lengths of things in RF applications is the one degree rule. That is, a tolerance resulting in one degree of error is acceptable.

I did get my needed info about the slots needing to line up "front to back", and was recommended to add wings for a better pattern. We very much do want an omni and have various horn and choke ring

Yeah I just want to chime in here. I think you’ll want some gain at that frequency (slot antennas are roughly omnidirectional). If you have tooling it would be just as well to make a horn

Hi all, I managed to find a 6' stick of WR90 with a choke flange at each end. My plan is to work with a friend in Albuquerque to build a pair of slot antennas using W1GHZ's documentation and

Hi Duffey - I completed the survey. 73, Dave N7RK -- Dave Hollander N7RK Arizona Tube Supply http://arizonatubesupply.com Ham Radio Page http://n7rk.com

Jim, I completed the survey Mike

All - If you have participated in a VHF+ contest in the last 2 years and included your e-mail address in your log submission, you should have received an invitation to complete a survey on the impact

I neglected to mention that I will be sending my position on APRS when I have coverage. James Duffey KK6MC Cedar Crest NM

If I work you on FT8 or FT4, and, please do try FT4, I will QSY to 2M if we worked on 6M, and to 6M if we worked on 2M. If we complete on 2M, let's try 432MHz. If you have 222MHz, we can try that as

Here is the KK6MC/r itinerary for the September 2021 VHF contest. As always, schedule is flexible and has some contingency built in, but it never seems like enough. If conditions are good, I may be

Sounds great Ed

Will look for you. N5JEH -- Sent from Outlook Email App for AndroidThursday, 09 September 2021, 10:56AM -06:00 from John Stanford wb8svn@...:

Wow Tom I’m impressed! I’ll look forward you on Sunday. John, KF6I -- John Stanford - President Tork Technologies, LLC dba Island Amplifier USA (714) 412-7399 ARS KF6I

To All.. Due to work commitments, I will not be starting my Rover operation until Saturday 6 pm AZ LOCAL time ,,I.E..0100 UTC Sunday,, I will start in the 4 corner are of DM32, DM33, DM42, DM43 and

My plan is to operate Saturday only, starting in DM53xx and moving just a bit at some point to DM54, depending on activity. I think I'll have internet there, so look for me on the NMVHF

I will likely be participating both days from here in Colorado Springs ( DM78pv ). Probably 6m, 5m, and 70cm SSB. I know that may not help you guys too much, but I have worked N5JEH in Albuquerque

Hi Mike, I will be portable at the south rim of the Grand Canyon at DM45aw. I'll be on 6 thru 1296 with long boom yagis on 2 meters and up. A loop on 6. SSB,CW,FT8. When I get up there tomorrow I will